TRIO.BAS-ISOLATOR

trio-bas-show-isolator-bluetooth-induction-rfid-web

TRIO

TRIO.BAS-ACC-03

TRIO.BAS-ACC-04

Air sampler to be offered to customers who make a large number of controls, in isolators or with staff rotation and that comply with the quality standards and QM LPG / GMP.

The use of three independent aspirating heads (satellite units) allows you to make three contemporary sampling cycles in three different isolators or in an isolator using different culture nutrients.

The sampling times are drastically reduced and limit the risk of contamination of the interior of the isolator since the connection between the control unit and isolator occurs by a simple electric cable. The automatic registration of operator, sampling location, sampling point and culture plates takes place automatically by means of a system of radio frequency RFID.          

As an alternative to RFID, this air sampler can be equipped with a BARCODE module through the use of a scanner (Barcode Reader) with Bluetooth. The data collected by the Barcode Reader are transmitted directly to the instrument. This solution proves to be useful for those who already use culture plates with Barcode 1D or two-dimensional Barcode 2D (QR Quick Response Code). The subsequent transfer of the collected data is via Bluetooth between the sampler and a PC or Laptop equipped with Bluetooth.

The PC or Laptop should have a dedicated software (BAS.PC). Battery charging is done by induction without any cable connection between the instrument and the charger. The Air sampler is free of any external plugs and is IP65 certified.

The induction charging base is equipped with a system that allows, regardless of auto-calibration already present in the instrument, to be able to check and possibly realign the state of precision of the air flow. This verification is necessary to avoid possible invalidation of the tests between annual controls for official certification.

The most important customers are the pharmaceutical and biotechnology industries (and all those other industries that have to apply GPL and GMP rules). Other customers are cosmetics, medical devices, industries that package sterile products for third parties, etc..

Innovative Performances Traditional Performances
  • Explosion proof (ATEX) version 1 and version 2
  • Bayonet aspirating head
  • Sampling time/volume: 1.000 litres in less than 3,5 minutes
  • Stainless steel or PS transparent disposable sterile or PC sterilizable head
  • Automatic instrument calibration
  • Check calibration system on site
  • No external connections
  • Induction battery charger
  • RFID Reader
  • BARCODE Reader
  • Bluetooth transfer data: PC, smartphone, tablet, printer
  • Identification according GPL/GMP/QM
  • IP 65 water & dust protection  
  • Techno plastic shockproof body
  • Stainless steel sampling chamber for isolators
  • Antibacterial treatment and chemical resistance
  • Bluetooth remote control
  • 90 cycle x1.000 lts for each head
  • Flexibility for many type of commercial plates
  • Contact plate (RODAC) or Petri dish without adapter
  • Battery autonomy  up 100.000 litres of air
  • Military type case
  • Easy servicing
  • Sampling at 210°
  • 100 or 200 litres air / minute
  • 3 Separated Cascade Passwoards
  • Light Portable instrument for easy manupulation
  • Alpha Numeric display
  • Sequential, Interval, Simoultaneus sampling
  • Automatic switch off
  • I.Q, O.Q., P.Q. Documentation
  • Cycle memorization
  • International standard
  • Low battery alarm
  • Menu’ software Instructions in several languages
  • Bioaerosol Application Notes
  • Buzz end of cycle
  • Flashing light during aspiration
CATALOG NUMBER DESCRIPTION
INSTRUMENT WHITOUT ASPIRATING HEAD (INDUCTION BATTERY CHARGER TO BE ADDED TO THE ORDER)
250 TRIO.BAS ISOLATOR Air sampler (100 lts/min) RODAC plate 
251 TRIO.BAS ISOLATOR  Air sampler (100 lts/min) Petri 90 plate
252 TRIO.BAS ISOLATOR  Air sampler (200 lts/min) RODAC plate
253 TRIO.BAS ISOLATOR Air sampler (200 lts/min) Petri 90 plate
254 TRIO.BAS ISOLATOR ATEX (explosion proof) Air sampler (optional) (100 lts/min) RODAC plate 
255 TRIO.BAS ISOLATOR ATEX (explosion proof) Air sampler (optional) (100 lts/min) Petri 90 plate
256 TRIO.BAS ISOLATOR ATEX (explosion proof) Air sampler (optional) (200 lts/min) RODAC plate 
257 TRIO.BAS ISOLATOR ATEX (explosion proof) Air sampler (optional) (200 lts/min) Petri 90 plate 
BASE STATION BATTERY CHARGER
310 Base Station Induction battery charger
STAILESS STEEL ASPIRATING HEAD
330 Stainless steel  head RODAC (alternative to Petri plate)
331 Stainless steel s/s head Petri (alternative to RODAC plate)
POLYCARBONATE / POLYSTYRENE ASPIRATING  HEADS (Optional)
335 Polycarbonate head 219 RODAC plate (10xbox)
336 Polycarbonate head 221 Petri 90 plate (10xbox)
340 Daily shift head 219  RODAC plate – polystyrene sterile (58xbox)
341 Daily shift head 219  Petri 90  plate – polystyrene sterile (58xbox)
POLYSTYRENE ASPIRATING HEADS + CULTURE MEDIA – CLOSE SYSTEM  (Optional)
346 CLOSE SYSTEM Aspirating head + culture media Tryptic Soy Agar – polystyrene sterile – (10xbox)
347 CLOSED SYSTEM Aspirating head + culture media Sabouraud Agar – polystyrene sterile – (10xbox)
348 Cover for CLOSE SYSTEM – polystyrene sterile – (20xbox)
345 Adapter for CLOSE SYSTEM Aspirating head Bactair 
BLUETOOTH (Optional)
280 Bluetooth module
300 Android APP “BAS” to transfer data on  Smartphone / Tablet and then by cable to PC  (alternative to software for data download)
295 Software download  to transfer data to PC (alternative to Android APP “BAS”) 
RFID RADIO FREQUENCY APPLICATION FOR GMP / GLP (Optional)
290 RFID reader module with antenna
291 Location preset RFID tag (20xbox)
292 User preset RFID tag (20xbox)
293 RFIF self-adhesive label for plate (100xbox)
BARCODE READER APPLICATION FOR GMP / GLP (Optional)
294 Barcode Reader Bluetooth (alternative to RFID)
USER CALIBRATION (Optional)
351
(Petri plate)
Base Station induction with user calibration system. (This Base is used in replacement of the Base Station cat. 310 when calibration System is applied)
352
(RODAC plate)
Base Station induction with user calibration system. (This Base is used in replacement of the Base Station cat. 310 when calibration System is applied)
ACCESSORIES (Optional)
370 STAND UP holder for tripod or trolley
380 Floor tripod with adapter
395 ROBUSTUS carring case