Accessories

TRIO.BAS™ TABLE HOLDER family

The holders are robustus platforms which greatly improve the stability of the air sampler when vertically positioned and reduce the risk of fall or damage.

370 STAND UP HOLDER FOR MINI

Size 150x110x90h mm. – weight 390 gr. Completely made in high density impact resistant technopolymer. The shaped base allows the vertical positioning of the air sampler with the use of just one hand. They can be positioned in any work surface or on all tripods and MINI multi holder chart with wheels. The stand up fixed on vertical tripod lets the air sampler be independent from the vertical tripod for charging the battery or removing the plates for sampling.



376 STAND UP HOLDER FOR MONO, DUO, TRIO

Size 145x105x85h mm. – weight 256 gr. Completely made in high density impact resistant technopolymer. The shaped base allows the vertical positioning of the air sampler with the use of just one hand. They can be positioned in any work surface or on all tripods and MINI multi holder chart with wheels. The stand up fixed on vertical tripod lets the air sampler be independent from the vertical tripod for charging the battery or removing the plates for sampling.



377 STAND UP HOLDER FOR AIRBIO

Size 165x165x70h mm. - weight 337 gr. Completely made in high density impact resistant technopolymer. The shaped base allows the vertical positioning of the air sampler with the use of just one hand. They can be positioned in any work surface or on all tripods and MINI multi holder chart with wheels. The stand up fixed on vertical tripod lets the air sampler be independent from the vertical tripod for charging the battery or removing the plates for sampling.



521 - VERTICAL HOOK

Size 13x10x25h cm - weight 300 gr. Completely made in stainless steel AISI 316. The shaped base allows the vertical positioning of the air sampler with the use of just one hand. It can be positioned in any work surface or can be fixed on all tripods and MAXI multi holder chart with wheels. The vertical hook fixed on vertical tripod lets the air sampler be independent from the vertical tripod for charging the battery or removing the plates for sampling.



530 - WALL/TABLE HOLDER

Size 21x13x16h cm - weight 700 gr. Completely made in stainless steel AISI 316. It can be positioned in any work surface or can be fixed onto a wall to keep the air sampler in the same direction of the air coming out from conditioned port.



373 - FLAT HOLDER

Size 14x12x1h cm - weight 100 gr. Completely made in high density impact resistant technopolymer. The shaped base allows the vertical positioning of the air sampler. This holder is suitable with air sampler with base station induction battery charger only.



TRIO.BAS™ FLOOR TRIPOD family

The floor tripods allow to position the air samplers higher than work surface and orientate them differently from vertical position.

380 - STANDARD FLOOR TRIPOD

Adjustable height from 56 cm to 153 cm. Completely made in aluminium. A ball joint fixes the air sampler and adjust the orientation of the air sampler. The air sampler can be fixed directly on the tripod or alternatively on a stand up holder (optional) fixed on the tripod.



523 - STAINLESS STEEL FLOOR TRIPOD

Adjustable height from 150 cm to 200 cm. Completely made in stainless steel AISI 316. A ball joint fixes the air sampler and adjust the orientation of the air sampler. As made in stainless stee to avoid particle emissions, this tripod is suitable mostly for cleanrooms. The air sampler can be fixed directly on the tripod or alternatively on a stand up holder (optional) fixed on the tripod.



TRIO.BAS™ CART ON WHEELS family

371 - MINI MULTI HOLDER CART ON WHEELS

Size 25x35x70h cm Completely made in stainless steel AISI 316. As made in stainless stee to avoid particle emissions, this tripod is suitable mostly for cleanrooms. It is robustus and it be easily used with the air sampler fixed on it. It is equipped with 3 shelves. It is suitable for medium height sampling.



372 - MAXI MULTI HOLDER CART ON WHEELS

Size 25x35x70h cm - adjustable height from 100 cm to 210 cm Completely made in stainless steel AISI 316. A fixed vertical hook and a vertical extensible support with ball joint are included with the chart. As made in stainless steel to avoid particle emissions, this tripod is suitable mostly for cleanrooms. It is robustus and it be easily used with the air sampler fixed on it. It is equipped with 3 shelves. It is suitable for high height sampling.



CARRYING CASE family

The air samplers are generally transferred from/to different production environments, even far from one to another. They are also periodically sent to service centers for calibration. Due to that, they need cases that protect them during movings and avoid damages. The TRIO.BAS™ carrying cases are either lightweight or robustus against any impact. The robusuts models are IP67 certified and they are resistant from extreme temperature changes. The inside is shaped and made by lightweight impact resistant materials.

CARRYING CASE

392 ROBUSTUS LARGE carrying case for TRIO.BAS™ MULTIFLEX 1+2/ MULTISTATION with 1/3 Satellites - 56x43x22h cm 395 ROBUSTUS STANDARD carrying case - 48x38x17h cm 394 ROBUSTUS MEDIUM carrying case for TRIO.BAS™ MULTIFLEX 1+2 /RABS ISOLATOR with 1/3 Satellites - 56x43x22h cm 398 ROBUSTUS LARGE carrying case TRIO.GAS - 56x43x31h cm 401 ROBUSTUS MEDIUM carrying case for ARBIO - 56x43x22h cm 402 ROBUSTUS MEDIUM carrying case for GAS TEST - 56x43x22h cm 403 LIGHT carrying case for CALITEST - 34x30x16h cm 524 LIGHT STANDARD carrying case for TRIO.BAS™ MINI - 43x35x19h cm



BLUETOOTH PRINTER

520 - BLUETOOTH PRINTER

Ultra-light and compact portable Bluetooth printer with a large roll of paper and high printing autonomy. It has an end paper sensor and it prints most popular barcodes. A practical belt hook,a battery charger and USB cable are included in the package. Size 11x9x5h cm - weight 450 gr.



421 - ROLL PAPER

For BLUETOOTH PRINTER - size 57 mm - 10 x box



BARCODE READER

294 - BARCODE READER BLUETOOTH 1D 2D USE

This miniature barcode reader, which is frequently used in microbiological air monitoring procedure, can help to save time, to better control the activity of the operator and to achieve a complete traceability of the test - size 6x3,5x1,5h cm - weight 45 gr.



291 - LOCATION PRESET BARCODE TAG

Size 8,5x5,5 cm - 10 x box



292 - USER PRESET BARCODE TAG

Size 8,5x5,5 cm. - 10 x box



CPU Command Portable Unit

301 - PCU - PORTABLE COMMAND UNIT

301 - PCU PORTABLE COMMAND UNIT This device has the APP Android ASAPP (code 300) already installed. It has a display 7” LCD. The Bluetooth connection with all TRIO.BAS™ instruments allows to download the sampling data. The PCU can also be used to remotely switch on, switch off and pause the air sampler. The data downloaded from the instruments through the PCU can be transferred to a PC where Air Sampler ASPC software is installed (i.e. by USB connection). The PCU Portable Command Unit is an ideal instrument to simplify and to facilitate the activity of operator.



BAS.SOFTWARE PC for TRIO.BAS™ Microbial Air Samplers

296 - BAS.SOFTWARE PC FOR TRIO.BAS™ MICROBIAL AIR SAMPLERS

The BAS.SOFTWARE PC allows to transfer the environmental sampling data from TRIO.BAS™ air samplers to PC according to Data Integrity as requested by regulatory authorities. The BAS.SOFTWARE PC is a software for personal computer (PC) that allows database management, editing, reporting and remote control the air samplers via Bluetooth® or via cable. Data integrity means that data must be reliable and accurate over its entire lifecycle. The most important features of BAS.SOFTWARE PC are: 1. Management of users, passwords and related permissions. 2. Communication and data transfer between TRIO.BAS™ air samplers



IQ,OQ, PQ documents

500... AND MORE - IQ, OQ, PQ DOCUMENTS

For industries involved in pharmaceutical and healthcare products or laboratories, product quality is very important and even small inconsistencies can generate disastrous results. Installation Qualification (IQ), Operational Qualification (OQ) and Performance Qualification (PQ) are essential parts of quality assurance in the equipment validation. IQ OQ PQ protocols establish that the equipment, which is installed and used, offers a high quality assurance, so that manufacturing processes will consistently produce products that meet predetermined quality requirements.