TRIO.BAS ™ | Microbiological Air Sampler - Orum International © All rights reserved.

125 TRIO.BAS Air Sampler - Care, Maintenance, Battery Charging

124 Cleanroom Microbial Air Monitoring with Operative Efficiency by TRIO.BAS Air Sampler

123 Indoor Air Bioaerosol Sampling from Building according NIOSH

122 Microbial Air Monitoring suggestions for reference graphic preparation

121 Evaluation of Microbial Contamination in Hospital, Clinic, Health Care Premises, etc

120 Correrct use of reference graphic in trends for Microbiological Environmental Data (MED)

119 Expulsion of Droplets during a Sneeze

118 TRIO.BAS Aspiration Cycle “Multimode”

117 Airborne Bacteria, Viruses and Spores in poultry premises by High Efficiency Electrostatic Bacterial Air Sampler

116 MUSEUM OF MICROBIAL AIR SAMPLERS Villa Cella – Milan

115 Protocol of Dressing in Cleanroom

114 The Gamma Irradiation

113 Do’s and Dont’ts in aseptic practices

112 Use of “Daily Shift” Sterile Aspirating Head for TRIO.BAS Air Samplers in Cleanroom

111 Applied microbiology in Cleanroom

110 Test questions related to working activity in Clean Room

109 Agar moisture loss in Petri dish using an impact air sampler system

108 The correct use of the I.Q., O.Q., P.Q. Qualification Manuals

107 SOP (Standard Operating Procedure) for TRIO.BAS ISOLATOR Microbial Air Sampler

106 Suggested procedures for microbial air sampling

105 Microbial Air sampler positioning

104 Data Integrity Good Practice in Microbial Environmental Monitoring

103 The TRIO.BAS C-D microbial air sampler to be used with Compact-Dry plates

102 Evaluation of two microbial active air samplers

101 The “physical laws” that regulate the diffusion and deposition of particles in the air

100 The physical tests to obtain the safety certifications of TRIO.BAS

99 Microbial Air Sampling Collection Efficiency – The number of Stokes

98 The Micro-Organisms in the Air

97 News in TRIO.BAS Sampler Software and Hardware

96 Subdivision of hospital operating department in different areas depending on the biological risk for staff and patients

95 Muestreador microbiológico de aire TRIO.BAS TRIO para la detección de contaminación microbiana en salas limpias y entornos controlados.

94 Instruction for Daily Shift Aspirating Head

93 The difference between D.Q., I.Q., O.Q., P.Q.

92 The considerations in selecting an aspirating head for active air samplers

91 Standard Operating Procedure for TRIO.BAS ISOLATOR

90 The interval time programmed air sampling in isolator and RABS by TRIO.BAS DUO and TRIO

89 TRIO.BAS ISOLATOR microbial air sampler technical details

88 Useful information about Pharmaceutical Environmental Microbiology

87 Useful information about Pharmaceutical Environmental Microbiology

86 Indoor air filtration system microbial monitoring

85 Compressed gas in pharma facilities. Microbial monitoring

84 USP 1116 for Microbial Air Monitoring – OOS (Out Of Specifications) and OOT (Out Of Trends)

83 TRIO.BAS MINI BLUETOOTH Microbial air sampler – Barcode Brief instructions

82 Sampling viable organisms by microbial active air samplers

81 The Bluetooth applications to transfer data from the TRIO.BAS microbiological air sampler

80 Glossary according USP 38

79 Culture medium and diluent USP 38

78 Microbial isolates identification accordingUSP 38

77 Isolators, glove boxes, RABS, C-RABS: what are they and what are the differences?

76 SOP – Standard Operating Procedure for use, maintenance, calibration of “TRIO.BAS” microbiological air samplers

75 Sequential sampling

74 Routine monitoring of air quality required in areas used for compounding sterile preparations

73 Air sampler disinfection

72 The choise and use of an active Microbial Air Sampler

71 TRIO.BAS GAS Microbial content in compressed air and gas – SOP Document

70 Test of spontaneous generation

69 TRIO.BAS Air Sampler Biological ef ciency test according ISO 14698-1

68 The ideal m/s speed of the impact air on agar surface of active air sampler

67 Air sampling in food premises

66 Air sampling in Hospital

65 Microbial air monitoring in Isolators

64 Full traceability

63 Good Air Monitoring Practice

62 Position of samplers in Cleanroom

61 Choose and comparation of samplers

60 Microrganism stress

59 Hole impact distribution

58 Fumigation

57 SOP Microbial Compressed Air/Gas Sampling according ISO 8573-7

56 Microbial Air Sampler with different air flow rate performances comparison

55 TRIO.BAS MINI Microbial Air Sampler Brief Illustrated Instructions

54 Application of MPN in microbial air environmental tests

53 The Barcode application in microbial environmental monitoring

52 Short course of microbiology for environmentalist

51 Training of personnel in Cleanroom, Isolator, RABS according USP 38 – The United States Pharmacopeial – Document (1116) Aseptic Processing Environments – Page 1195

50 Ten suggestions to apply the Best Micro-Pipette Practice in microbiology

49 Simple tips to facilitate the phenotypic identification of aerobic microorganisms after collection and incubation in Petri dish.

48 The Bluetooth applications to transfer data from the TRIO.BAS microbiological air sampler.

47 Glossary for Microbiological Air Environmental Monitoring

46 Culture media and diluents – Selection of Growth Media in Cleanrooms, RABS, Isolator

45 Identification of microbial isolates

44 Environmental Microbial Data interpretation in aseptic processing.

43 Available microbial air samplers for airborne microorganisms.

42 Suggested Frequency and Microbial Recovery rate of Sampling for Aseptic Processing Areas

41 Evaluation of different microbial air samplers

40 Installation and use of TRIO.BAS DUO and TRIO microbial air samplers

39 Installation and use of TRIO.BAS MONO microbial air sampler

38 Installation and use of TRIO.BAS MINI BlueTooth microbial air sampler

37 The advantages of the use of a 3 heads air sampler in isolators and RABS

36 The advantages of the use of a 3 heads air sampler in Clean Room

35 Certificate of conformity

34 Positioning of microbiological air samplers in Clean Room and Controlled Environment

33 Correct aseptic sampling during air sampling monitoring

32 Chromogenic media for colorful air microbial detection - SOP

31 Performances of TRIO.BAS air sampler according ISO 14698

30 TRIO.BAS mod. Trio air sampler: WHY?

29 SAS Surface Air System History

28 USP Regulation 797 for sterile compounding

27 Mapping for the Microbiological Environmental condition monitoring in food production

26 Maintenance and Calibration of air sampler according GMP and GLP – EN 14042

25 European Standard for biological Agents Monitoring in workplace atmosphere

24 Record of results for microbial air sampling

23 Food Glossary according EFSA (European Food Safety Authorities)

22 Microbial monitoring in closed environment: general suggestions

21 Air Sampling Standard According ISO 14698

20 Legionella aerosol monitoring

19 Industrial air handlers microbiological monitoring

18 Compressed air microbiological monitoring

17 Nosocomial Infections: Aspergillosis air sampling

16 Stainless Steel Aspirating head for microbiological air sampler

15 Trouble shooting in environmental monitoring

14 Standard Operative Procedure for Microbial Air Sampling in Clean Room

13 Microbiological Air Monitoring in Operating Room

12 Number of location and measurement for a reliable microbiological air testing

11 Mycobacterium tuberculosis bioaerosol sampling

10 Airborne microbial Challenge Test for pharma packaging integrity

9 Fungal Spore Control Ventilation (FSCV) in Hospital

8 Legionella protocol according CDC USA

7 Hands Monitoring in aseptic filling premises

6 Sampling Plan

5 Bioaerosol Glossary

4 Staff training for food handlers

3 The use of Contact Plates for surface monitoring

2 Microbiological Validation of Biohazard Cabinet and Laminar Flow Bench

1 Principle of microbial air sampler by impact method on agar plate

N.94

Instruction for Daily Shift Aspirating Head

Standard Operating Procedure (POS) Use of DAILY SHIFT aspirating head for TRIO.BAS air samplers OBJECT Procedure for the correct use of microbial air sampler in Cleanroom, Isolator, RABS PURPOSE Reduction of the risk of microbial contamination during air sampler handling

To continue, type the password and then click login, or request credentials here.

LOGIN