TRIO.BAS™ ISOLATOR RABS

One external command unit fabricated completely in stainlees steel connected to 1 or 2 or 3 satellites with Bluetooth capability and cable for charging

The TRIO.BAS stainless steel satellites are the ideal solution for RABS and Isolator because the sampled air remains inside the cabinet and doesn’t need to be expulsed.

DOWNLOAD BROCHURE

DESCRIPTION

  • The RABS ISOLATOR and the satellites are fabricated in AISI 316 rated stainless steel.
  • This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP.
  • Main customers are pharmaceuticals, cleanrooms and biotech industries.
  • A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code).
  • The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
  • The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
  • It is possibile to work either in manual or automatic mode.
  • The battery is recharged by a power cable connected directly to the air sampler.
  • The 200 lts/min air flow reduces the operator time and the time sampling.
  • This air sampler allows monitoring of separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom.
  • The use of sterile "Daily Shift" aspirating heads reduces the risk of contamination.
  • The possibility to use 1/2/3 different aspirating heads allows to have 1/2/3 different culture media at the same time or the ability to sample BEFORE (at rest), DURING (in operation) and at the END of each processing cycle.

PERFORMANCES

AISI 316 rated stainless steel (command unit + satellite units)
Compliant according EN/ISO 14698-1, GMP and GLP
Stainless steel aspirating head with quick bayonet closure, identification number and stainless steel cover to prevent contamination
Volume of aspirated air: 100 or 200 l/m
Selected volumes from 30 to 2.000 litres and 17 preset programs
The aspirating chamber is suitable for 55 mm Contact plates or 90 mm Petri dishes
Auto calibration: power/flow electronic real time control
Power supply system: the instrument can be charged continuosly by AC powered source 110/240 Volt 50/60 Hz or by rechargeable batteries (inserted inside the air sampler)
Cycles battery autonomy: 60.000/70.000 litres
Language: English, French, German, Spanish, Italian
Manual and automatic passwords
Operative aspirating cycles: manual and automatic
Memorized data: up to 1.000 samples
Configuration users and places: 100
Delayed, remote, start, simultaneous or interval sampling
Bluetooth connection or use of cable for data transfer
Automatic next calibration reminder
Data integrity CFR 21 and GAMP5
CE mark
Continuous/trending analysis according to the USP
Dimension: 25x13x18h cm
Weight: 3.150 gr
Built in ISO 9001 premises

Note
All TRIO.BAS air samplers are suitable for 90 mm Petri dish or 55 mm Contact plate. In case of conversion from Petri dish to Contact plate or the other way around, it is necessary to adopt the specific aspiration head because they have different configuration. It is also necessary to adjust the position of the fixing spring inside the aspiration chamber of the sampler. This information is valid for both stainless steel aspiration head (see Code 330 and 331) and sterile ”Daily Shift” aspiration head (see Code 340 and 341) .

IDENTIFICATION CODES

Code TRIO.BAS RABS ISOLATOR with 1 SATELLITE PACK (*)
268K TRIO.BAS™ RABS ISOLATOR 100 Contact with 1 Satellite PACK
269K TRIO.BAS™ RABS ISOLATOR 100 Petri with 1 Satellite PACK
270K TRIO.BAS™ RABS ISOLATOR 200 Contact with 1 Satellite PACK
271K TRIO.BAS™ RABS ISOLATOR 200 Petri with 1 Satellite PACK

(*) each PACK consists of: 1 TRIO.BAS™ RABS ISOLATOR with battery charger, 1 calibration certificate, 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt), 1 cable for data transfer, 1 robustus medium carrying case.

Code SATELLITE UNIT PACK(*)
260K SATELLITE UNIT Contact PACK
261K SATELLITE UNIT Petri PACK
262K SATELLITE with HEPA FILTER Contact PACK
263K SATELLITE with HEPA FILTER Petri PACK

(*) each PACK consists of: 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt).
(**) second or third satellite to be added to basic sampler.

Code SATELLITE ACCESSORIES
180 S/S IN REST holder (code 180) for Petri dish, ASPIRATING head
265 CABLE CONNECTION between the satellite and the command unit - 1 set of 5 meters
272 CABLE CONNECTION between the satellite and the command unit - 1 set of 20 meters

RELATED VIDEO

Need more informations?