Select language

TRIO.BAS™
Flugas System

It is a microbiological sampler to test the quality of compressed air/Nitrogen/CO2 or other gas in Cleanroom

  • The volume of aspirated air can be 100 or 200 lt/min
  • The 100 l/m (or 200 l/m) flow rate is guaranteed by a flow regulator controlled by operator via a calibrated flow meter
  • All components are autoclavable (with exception of flow meter and timer)
  • The ASPI GAS chamber is included in the system
  • The data is automatically recorded when the system is used with TRIO.BAS/AIRBIO air samplers. When used with aspirating gas chamber, the data is recorded manually
  • Inlet gas pressure 1 - 10 BAR

Use and application

  • Pharma, Cleanroom, Biotechnology, Fermentation, Medical Device
  • Food, Dairy, Beverage, Agro, Catering, Cosmetics
  • Stem Cell
Contact us
  • FLUGAS System consists of:
    • stainless steel compact base;
    • analogic calibrated vertical flow meter for compresed air and Nitrigen gas;
    • stainless steel AISI 316;
    • ASPIGAS chamber with Aspirating head;
    • digital timer (7);
    • gas input to be sampled
  • The system is compliant with ISO Standard 8573-7 and ISO 14698.
  • If the FLUGAS System is used in combination with ASPIGAS chamber, the test is manual and the time is calculated by a digital timer.
  • If the FLUGAS System is used in combination with a TRIO.BAS or an AIRBIO ONE air sampler the whole cycle of the test is programmed automatically, controlled and recorded by the software of the device. The sampling data can be transferred via cable or Bluetooth to a PC with a dedicated software according to GMP and GPL.
  • All the components of the FLUGAS System are autoclavable (excluding the vertical flow meter and timer)
  • Input pressure: 1 ÷ 10 bar: air flow 100/200 lt/min (200 l/m optional)
  • Size 21x17x12H cm. (with flow meter 32,5H cm) Weight: 1,38 Kg. (with flow meter 2 kg)
  • IQ, OQ, PQ documentation are available
  • Compliant with ISO 14698-1, EN 17141, ISO 8537-7 and FDA
Code FLUGAS SYSTEM
597(*) FLUGAS System Petri pack
598(**) FLUGAS System Contact pack
FLOW METER for CO2 compressed gas

(*) each PACK consists of: 1 FLUGAS with Flow meter for compressed air e Nitrogen gas, 1 bell chamber, 1 ASPIGAS chamber for Petri dishes 90 mm, 1 aspirating head with s/s cover head, 1 timer, 1 robustus large carrying case, 1 calibration certificate
(**) each PACK consists of: 1 FLUGAS with Flow meter for compressed air e Nitrogen gas, 1 bell chamber, 1 ASPIGAS chamber for Contact plate , 1 aspirating head with s/s cover head, 1 timer, 1 robustus large carrying case, 1 calibration certificate

TRIO.BAS™

MINI MULTI HOLDER cart on wheels

This cart is suitable ideally for cleanrooms.

It is robust and is easily used with an air sampler fixed on it. It is equipped with 2 shelves.

It is suitable for sampling at a medium height. Optional: stand up holder for TRIO.BAS MINI (code 370), stand up holder for TRIO.BAS MONO, DUO, TRIO (code 376) or stand up holder for AIRBIO (code 377).

ID PACK CODE

Code
371 MINI MULTI HOLDER cart on wheels - stainless steel AISI 314 and 316 - size 500x400x850H mm - weight 6 kg.

TRIO.BAS™

IN-REST holder

Operators, and their activities, represent the greatest risk of contamination inside cleanrooms. Operators must work under stringent conditions; required to wear special overalls, gloves, facemasks, and eye masks. For these reasons, it is advisable to create the best possible working conditions. Air sampling with microbiological samplers is a complex and delicate operation, whether using an instrument with a single aspirating head, or an instrument with more than one aspirating head. To facilitate operations and avoid errors and risks of contamination during the sampling phase, the TRIO.BAS IN-REST is particularly useful as a temporary support for culture media plates and/or lids, and instrument sampling heads.

FEATURES

  • Built in AISI 316 stainless steel
  • Wedge shape inclined at 150°
  • Two-sided Support
  • Usable for Petri dishes, Contact plates and aspirating heads
  • A single hole on one side, and two holes on the other side, facilitate identification of plates and heads

ID PACK CODE

Code
180 IN-REST holder - Stainless steel AISI 316 - size 90x120x105H mm - weight 127 gr.

TRIO.BAS™

GLP EASY RACK

Cleanroom Stainless Steel Rack with handle for stacking, storing, and transporting culture plates (Petri or Contact plate). They are used to maintain the distance inside the incubator according the GLP* (Good Laboratory Practice).

DETAILS

  • They can be refrigerated, incubated and autoclaved
  • Each rack can hold up to 11 Petri dishes, or 15 Contact plates
  • A wide front opening permits easy access but prevents dishes from sliding out
  • The same rack can be adjusted for Petri or Contact plate
  • Avoids all risk of accident during loading and transport to the incubator for staff bio-hazard safety
  • The weight of only 280 gr. make it light and easy to carry
  • The small size allows to maximize the space inside the incubator
  • Racks are fully autoclavable

*ISO Standard and GPL request that inside the incubator the culture plates are stacked not more than six and at a distance of 2 cm.

ID PACK CODE

Code
176 GLP EASY RACK AISI 316 Petri - capacity up 11 Petri dish 90 mm. size: diam. 110x215h mm. - weight 285 gr.

TRIO.BAS™

GLP EASY RACK

Cleanroom Stainless Steel Rack with handle for stacking, storing, and transporting culture plates (Petri or Contact plate). They are used to maintain the distance inside the incubator according the GLP* (Good Laboratory Practice).

DETAILS

  • They can be refrigerated, incubated and autoclaved
  • Each rack can hold up to 11 Petri dishes, or 15 Contact plates
  • A wide front opening permits easy access but prevents dishes from sliding out
  • The same rack can be adjusted for Petri or Contact plate
  • Avoids all risk of accident during loading and transport to the incubator for staff bio-hazard safety
  • The weight of only 280 gr. make it light and easy to carry
  • The small size allows to maximize the space inside the incubator
  • Racks are fully autoclavable

*ISO Standard and GPL request that inside the incubator the culture plates are stacked not more than six and at a distance of 2 cm.

ID PACK CODE

Code
175 GLP EASY RACK AISI 316 Contact - capacity up 15 Contact plate 55mm. size: diam. 110x215h mm. - weight 285 gr.

TRIO.BAS™

CLEANROOM BAG

Sterile bags ideal for safely containing and transporting Petri dishes, Contact plates, Swabs, or other objects, outside of the cleanroom:

  • Sterility Traceability.
  • Triple-wrapped and individually sealed to ensure sterility.
  • Beta or Gamma sterilization certificate available.
  • Color is easy to identify in the cleanroom.
  • Write-on oversized area to identify sample contents suitable for use with permanent markers.
  • Self-adhesive flap closure prevents contamination after samples are placed inside of the bag.
  • Included an easy-open thear line which guarantees the sterility of the single bag.
  • The elongated, flat bag design facilitates stacking of multiple bags, easy reading of bag contents, and allows plate lids to stay secured inside the bag during handling.

ID PACK CODE

Code
381 CLEANROOM BAG - plain sampling bag - polyethylene film - sterilized by irradiation Gamma or Beta ray - sizes: 40x13 cm. - 15 x bag - 150 x box.

TRIO.BAS™

ROBUSTUS CARRYING CASE

These Carrying cases have very performing characteristics. This allows the instruments to be safely contained both for transport by customers when they have to carry out tests in different environments. They are also indispensable when they must be sent to accredited assistance centers to carry out repairs or calibration - Easy to open double throw latches - foam inlays to protect the instrument.

Made in polypropylene copolymer - Thick body material - range temperature -30° /+90° C - are watertight to offer protection from water ( IP67), dust and impact. No problem for airplane transport (ATA300).

ID PACK CODE

Code
394 ROBUSTUS MEDIUM TR carrying case for TRIO.BAS MULTIFLEX 1+2/RABS ISOLATOR with 1-3 Satellites - size 560x430x220H mm - weight 4,6 kg.

TRIO.BAS™ BAS Software
TRIO.BAS™

BAS Software

This software is compliant with CFR 21 Part 11 Data Integrity. It manages the sampling data transfer from the air sampler to the PC. It also facilitates the configuration of users and places on the air sampler.

ID PACK CODE

Code
296 BAS Software license - transfer data from instrument or smartphone/tablet to PC by Bluetooth.

TRIO.BAS™ APP Android
TRIO.BAS™

APP Android "BASAPP"

APP Android "BASAPP" - transfer data from instrument to smartphone/tablet by Bluetooth

ID PACK CODE

Code
302 APP Android "BASAPP" - transfer data from instrument to smartphone/tablet by Bluetooth.

TRIO.BAS™

Sterile Daily Shift Aspirating Head for Contact plate

The sterile Daily Shift aspirating heads (DSH - sterile Daily Shift Head) avoid the sterilization process necessary for stainless steel aspirating heads.

The sterilization is proven by an official certificate. This document is requested by regulatory authorities.

The triple irradiated sterile packaging allows the users to always have aspirating heads ready for use.

ID PACK CODE

Code
340 Sterile Daily Shift Aspirating Head for Contact plate 55 mm - size 100 diameter X 14 H mm - weight 48 gr - in triple sterile bag (20 x box) - size 375X265X220H mm - weight 1,3 kg.

TRIO.BAS™

Sterile Daily Shift Aspirating Head for Petri

The sterile Daily Shift aspirating heads (DSH - sterile Daily Shift Head) avoid the sterilization process necessary for stainless steel aspirating heads.

The sterilization is proven by an official certificate. This document is requested by regulatory authorities.

The triple irradiated sterile packaging allows the users to always have aspirating heads ready for use.

ID PACK CODE

Code
341 Sterile Daily Shift Aspirating Head for Petri 90 mm plate - size 102 diameter X 35 H mm - weight 52 gr - in triple sterile bag (20 x box) - size 375X265X220H mm - weight 1,4 kg.